M8 X 110 Chem stud kit N/W HOT DIP GALVANISED HEC / CLASS 5.8 CHISEL POINT

Hobson Chemical Anchor Studs are single unit non-expansion type fasteners that are used in pre-drilled holes. They comprise a chisel point stud available in flat cut or external hexagon type head, a nut, and a washer. Fixing of the stud is achieved by inserting a suitable curing resin into the hole using a glass chemical capsule or injection-type adhesive system. The stud is then inserted into the hole and rotated either by hammer drill for (glass capsule) or hand for (injection type) to allow for proper setting into the resin. The anchor can be loaded once an appropriate curing time has been reached.

Features:

• Good load capability
• Non-expanding type fastener
• Resistant to vibration
• Complete sealing of the hole
• Can be installed close to the edge
• Reduced spacing between anchors
• Excellent holding power in weak base materials

Applications:

Ideally used in applications that require a light, medium, or heavy-duty anchor for fixing into concrete, brick, or block base materials.

Typically used by contractors in the construction, building, and engineering trades.

Commonly used in applications that require a non-expansion type fastener. Can be used in a range of applications such as internal and external residential fixings, holding down fixtures such as machinery, pumps, motors, fabrication and suspension work, railing, stairs, balconies, etc.